Gearbox Rebuilding Kit

Gearbox rebuilding kit for Rod Change A+ only.

• 2 x Differential Rollers - RHP
• 1 x Single Row RHP Roller - 4 Synchro
• 1 x Roller 1st Motion Shaft Pilot to Clutch Case - RHP
• 1 x Roller Double for Main Shaft - RHP
• 4 x Dimspeed Baulk Rings
• 1 x Layshaft A+ - Performance
• 1 x Layshaft Large Roller
• 2 x Dimspeed Needle Roller Bearings - Idler Gear 4 Sync*
• 1 x Speedo Pinion Gasket
• 2 x Gearbox Output Shaft Gaskets
• 1 x Gearbox Rod Change Anti Oil Leak Seal Kit
• 2 x Gearbox Oil Pick Up Pipe Gaskets
• 1 x Copper Sump Plug and Block Washer
• 1 x 1st Motion Shaft Nose Circlip
• 1 x Reverse Detent O-Ring - Rod Change
• 1 x Gearbox Differential Pinion Locktab
• 1 x 1st Motion Shaft Locktab
• 2 x Differential Output Shaft Oil Seals
• 1 x Oil Pipe Central Pick-Up Gearbox

This kit doesn't include the internal rollers bearings for the 2nd, 3rd and 4th gear because they are rarely damaged. Therefore, it still highly recommended to check them while rebuilding your gearbox.

*High quality roller bearing with 14 rollers as the original.